Moonraker

Moonraker is already installed by default, but unfortunately an outdated version and not activated.

Clone default Moonraker

First we download the default Moonraker files and install the dependencies.

cd /usr/share
git clone https://github.com/Arksine/moonraker.git moonraker-org
./moonraker-env/bin/pip install -r ./moonraker-org/scripts/moonraker-requirements.txt

Download default settings

As a second step, we download the default settings:

cd /usr/data/printer_data/config/
wget https://raw.githubusercontent.com/meteyou/creality-k1/main/moonraker-config/moonraker.conf

Activate service

The last step is to activate the service. Here we download a ready to use service file and replace the standard file:

cd /etc/init.d/
rm S56moonraker_service
wget https://raw.githubusercontent.com/meteyou/creality-k1/main/moonraker-config/S56moonraker_service
chmod 755 S56moonraker_service

After this change we can restart the printer and check if Moonraker is available. To restart the printer, execute the following command:

reboot

If the printer has started successfully, open a browser window and open the address http://<ip>:7125. A page like this should be displayed:

Moonraker dashboard